תהליך ייצור חומרי מתכת טיטניום בשפע

Jul 13, 2021

חברתנו צמודה לבסיס ייצור ספוג הטיטניום האיכותי, ורכישת חומרי הגלם נעשית מספוג טיטניום דרגה 0 וספוג טיטניום דרגה 1, מה שמבטיח ביסודו את איכות המוצר ומניח את הבסיס לעיבוד הבא של המוצר ואיכות המוצר הסופי.

titaniumsponge

At present, the industrial method for the production of titanium metal is the Kraul method, and the product is titanium sponge. The traditional process of making titanium is to melt and cast sponge titanium into ingots, and then process them into titanium. According to this, the main steps of the technological process from mining to making titanium are: titanium ore -> mining -> beneficiation -> too concentrate -> enrichment -> titanium-rich material -> chlorination -> crude TiCl4-> Refining -> Pure TiCl4-> Magnesium reduction -> Sponge titanium -> Casting -> Titanium ingots -> Processing ->חומר טיטניום או חלקי טיטניום. הכנה כימית של TiCI4 גולמי. בנוסף, פעולת היציקה צריכה להיות תהליך מתכתי, אך לעיתים היא מסווגת גם כתהליך עיבוד.

91de7b11f194f8ef265d451cfd989d6

העיבוד בתהליך הנ"ל מתייחס לעיבוד ויציקה פלסטית. שיטות עיבוד פלסטיק כוללות פרזול, שחול, גלגול, מתיחה וכן הלאה. הוא יכול לעבד מטילי טיטניום לגדלים שונים של עוגות, טבעות, צלחות, צינורות, סורגים, פרופילים ומוצרים אחרים, וניתן גם ליצוק לצורות שונות של חלקים ורכיבים. לעיבוד פלסטי של טיטניום וסגסוגות טיטניום יש מאפיינים של עמידות גדולה לדפורמציה; הפרש פלסטיות בטמפרטורה רגילה, מגבלת תפוקה גבוהה ויחס מגבלת חוזק, ריבאונד גדול, רגיש לחריצים, קל לחיבור עם תבניות במהלך דפורמציה, וקל לספוג גזים מזיקים בעת חימום וכו'. עיבוד פלסטיק קשה יותר מפלדה ונחושת.


לכן, טכנולוגיית העיבוד של טיטניום וסגסוגות טיטניום חייבת לשקול את המאפיינים הללו שלהם.

psb (2)

  Titanium adopts plastic processing, the processing size is not limited, and it can be mass-produced, but the yield rate is low, and a large amount of scraps and residues are generated during the processing. In view of the above shortcomings of titanium plastic processing, powder metallurgy technology has been developed in recent years. The powder metallurgy process of titanium is the same as ordinary powder metallurgy, but the sintering must be carried out under vacuum. It is suitable for the production of large-volume, small-sized parts, and is especially suitable for the production of complex parts. This method requires almost no processing and has a high yield rate. It can not only make full use of titanium waste as raw materials, but also reduce production costs, but it cannot produce large-size titanium parts. The powder metallurgy process of titanium is: titanium powder (or titanium alloy powder) -> sieving -> mixing -> press forming -> sintering -> auxiliary processing ->מוצרי טיטניום.

ext (2)

You May Also Like
שלח החקירה